waiting.....

So it hasn't even been ONE week yet and I'm already getting tired of waiting for the lacquer to cure completely. I took the guitar by Little Rock Frets to show them the progress. While I was there, I learned a new word... seems like an appropriate place to use the word because my guitar sure does have some CHATOYANCY going on. What is chatoyancy? ask wiki

"Chatoyancy can also be used to refer to a similar effect in woodworking, where certain finishes will cause the wood grain to achieve a striking three-dimensional appearance.[1] This effect is often highly sought after, and is sometimes referred to as "wet look", since wetting wood with water often displays the chatoyancy, albeit only until the wood dries. Oil finishes and shellac can bring out the effect strongly."

Getting Shiny!!!

7 coats of clear lacquer and she's starting to shine! The finish already always looks wet so I am STOKED to see how she looks when polished and buffed out! I've got several more coats to go before I'm done spraying. Typically you get 3 to 4 coats a day if you wait like you're supposed to between them. After that, it's 30 days of WAIT before I can finish it.

6 Coats

Today I sprayed coats 4,5, and 6 of the clear gloss nitro lacquer. After the 4th coat, i started noticing a couple of small runs. one on the back of the head stock and one on the top "horn" of the body. I believe after letting the guitar dry at least 12 hours i should be able to do a light wet sand over those runs and and be good to go. Time to hit up a couple of forums for more education before i proceed. I keep reminding myself that this is my FIRST guitar build so imperfections are likely, however... i don't deal well with that so i'm sure as heck gonna try to get as close to perfect as I can. Overall, I'm excited with the results this far! Stay tuned!

unexpected delay

Well, I am not one to complain about having a lot of business to keep me employed, but sometimes work just gets in the way of the fun stuff! December was really busy but we made it through the holidays and are ready for 2012. Back just before Christmas I ordered what would become a temporary spray booth to do the clear coat. It came in a couple of weeks ago but was missing some parts. I waited another week to get the parts and still didn't get all of them. Finally this weekend I got it set up. Next was to get a humidifier setup in the room and a hygrometer to measure the humidity levels in the spray booth so I can keep it consistent during the process. Today I sprayed the last coat of sanding sealer on the guitar and will likely put the first coat of clear nitro finish on tonight. Doing more research now to make sure I know what i'm doing before I get to spraying!